Manufactures Warranty
(full details are in the certificate supplied with your new Sewing Machine)
If your Machine develops a fault caused by, (in sole judgement or that of its authorised Agent Seweasy Services) a defect in manufacturing /workmanship then the defective part will be replaced, the warranty will run from 3yrs from purchase 1yr for all electrical parts, repairs under the Warranty will be carried out free for 1 year
(Extended to 3 years under Seweasy)
With correct use your New Machine should give many years of trouble free sewing
IMPORTANT Please check your threading applies to all Sewing machines
When threading up machine please ensure that the PRESSER FOOT is in the HIGHEST POSITION, lift the presser foot lever up, this will release the upper tension discs, enabling the thread to locate correctly around & to the centre of the tension discs. Thread up with your left hand holding the cotton reel with your right hand., pulling the thread into the upper tension discs.
Otherwise the thread will * mass in loops under the material and jam the machine.
LOOPING/JAMMING
(on topload drop in bobbin type)
This can cause the bobbin case to dislodge with damage caused by the
needle hitting the bobbin case,
WHAT TO DO? undo the needle plate screws and remove the needle plate,remove the bobbin case (black plasic part) inspect for damage caused by needle, replace in correct position, replace needle plate.
WHY DID THIS HAPPEN? Incorrect threading see note above
(on front load bobbin case models with common oscillatory hook)
This can cause a cotton lock in the race jamming the Machine
WHAT TO DO? a cotton jam in the bobbin area can be cleared by
removing the shuttle race ring and shuttle hook, turn the 2 retaining levers one to the left & one to the right (Black Plastic fingers), remove ring/hook, clean and replace.
WHY DID THIS HAPPEN? Incorrect threading see note above
MISSING STITCHES
Blunt needle/bent needle/ needle in the wrong way (Flat side to the back on most modern machines) Wrong needle for the fabric ie stretch fabric needs stretch needle
WHAT TO DO? check, change needle
STILL MISSING STITCHES
Its possible that the Sewing machine in out of timing (Hook Timing)
WHY DID THIS HAPPEN? Most common cause is machine jamming due to Incorrect threading see note above, dislodging hook timing.Or timing belt/ gears/ hook become loose
WHAT TO DO? e-mail: sewingmachines@hotmail.co.uk
NEEDLE HITTING BOBBIN CASE
WHAT TO DO? Check needle is correctly inserted (as high as it can go) make sure its is not bent?
Also
Please see A above
e-mail: sewingmachines@hotmail.co.uk for all you need or wanted to know about sewing machines visit the Seweasy web site: www.sewingmcs.co.uk
NOTE: GUARANTEE /WARRANTY WILL NOT COVER DAMAGE CAUSED BY INCORRECT THREADING OR MISUSE
CLICK ON BELOW LINK TO VIEW 'HOW TO CORECTY THREAD UP A SEWING MACHINE'
http://www.youtube.com/watch?v=cP_20vx6gJc